“Terry was on time and was very professional. His down to earth personality, and his knowledge of the products was very beneficial.”
Basement Mold Removal in Spokane, WA
Spring melt and century-old foundations keep Spokane basements damp; we treat the joists, the walls, and the finished rooms without tearing them out. An accredited lab checks the air before and after, and most homes are done in a day.
When the snowpack lets go in late February or March, often on the back of a Chinook wind, the water runs to the low point of the lot, and basement mold removal in Spokane, WA is the call that follows a few weeks later. Roughly one house in four inside the city of Spokane was built before 1940. Manito, Browne's Addition, and the Perry District are full of them, and they sit on full-depth basements because footings here have to reach at least 24 inches below grade to clear the frost line. Those foundations went in long before modern waterproofing, so when the ground thaws and the melt runs, it comes through the wall.
We treat basement mold with the VaPURE process, a two-stage vapor that reaches the joists overhead, the framing behind finished walls, and the concrete or stone itself. Most basements need no demolition. Everyone is out of the house during treatment, typically 4 to 6 hours, and back the same evening.
Part of our Mold Remediation service in Spokane, WA.
Trusted by homeowners across the Inland Northwest.
Every reviewer is a real client. Read more on our reviews page.
“Very quick response, friendly, and informative. Answered all my questions and provided us with a number of options.”
“Terry came and inspected my apartment wall for water damage/moisture in the wall. He did a very good job assessing the damage and used the proper equipment to do so. He was honest and even gave me knowledge about how professionals assess for damage. I would highly recommend My Pure Environment. They are the best and the most honest in the area.”
The March melt and the seepage line
Spokane's snow usually starts melting in late February or March, and the runoff arrives faster than frozen ground can take it. Local news runs the same reminder each year: test the sump pump before the first big spring storm. Where drainage is poor, water pools against the foundation and wicks in. You see it as a white mineral tide line on the block, damp carpet along one wall, or a musty smell that starts in April and is still there in June.
Mold does not need standing water. It needs a surface that stays damp, and a basement wall that sweats each spring gives it one for weeks at a stretch.
Old foundations on the South Hill, newer ones in the Valley
A 1910 house in Browne's Addition has a foundation of stone or early concrete, an unfinished basement, and lath-and-plaster walls upstairs. Moisture moves through those walls, and mold sits on the joists and the underside of the subfloor where nobody looks. Spokane County's housing is newer on average, with a median build year of 1978, and in newer homes across Spokane Valley and North Idaho the problem is often the opposite: a finished basement with drywall, carpet, and a family room built tight against a wall that was not fully dry. The framing behind the drywall is where we find it.
Treatment without the tear-out
Because the VaPURE process is a vapor, it reaches behind finished walls, into the joist bays, and across the slab without opening anything up. The sterilant stage treats the mold. The protectant stage bonds to the surfaces and helps resist regrowth once the wall is dry. If drywall or carpet is soaked through and falling apart, it comes out, and we say so before we start rather than after. The house is empty while we work, people, pets, and plants included, and most jobs finish in a single day.
Before we treat, Terry or one of the team maps the moisture with a meter so you know where the water is getting in. That part is yours to fix. Carpet Mold Removal is often part of the same visit when the flooring has been wet.
The lab report you keep
Air samples go to an independent accredited lab before and after, and you keep the written report. It shows what the counts were, what they are now, and the date. Whether you are selling the house, renting it out, or just want to know, that report is what the next person will ask to see.
Cost factors for a Spokane basement
Square footage, how much of it is finished, whether any materials have to come out, and how wet it still is. A dry, unfinished basement with growth on the joists is a straightforward job. A finished basement that took water in March and sat until May is not. Consultation is free, and the quote does not commit you to anything.
Why homeowners choose us.
Often No Demolition
Most basement jobs skip the tear-out. The vapor reaches behind the drywall and into the joist bays, so the family room stays a family room.
Independent Lab Verification
An accredited third-party lab tests the air before and after, and the written report is yours.
Most Homes Treated in a Single Day
Basement treatment typically runs 4 to 6 hours. Out in the morning, home for dinner.
Frequently asked questions.
Have a question we haven't answered? Contact us, or call 866-940-1153.
Usually, yes. A musty smell that arrives with the melt and fades by summer points to a wall or floor that gets damp each year. A moisture meter finds where, and Basement Mold Inspection with lab sampling tells you how much.
In most cases, no. The vapor treats the framing and the back of the drywall without opening it. Materials that are soaked and crumbling are the exception, and we tell you upfront.
No. The house is vacant during VaPURE treatment, people, pets, and plants alike. It usually takes 4 to 6 hours, and you come home the same day.
No. Treatment handles the mold, and the protectant helps resist regrowth, but the water needs its own fix, whether that is grading, gutters, a sump pump, or sealing the wall. We show you where it is coming in so you can sort it.
Book a basement consultation before the next melt.
Call 866-940-1153 or request a free consultation. We are in the office Monday to Friday, 7am to 7pm.
Back to Mold Remediation in Spokane
Serving Spokane & the Inland Northwest.
Spokane is home base, and most of our work is across Spokane County and Kootenai County, ID: Spokane Valley, Liberty Lake, Cheney, Mead, Coeur d'Alene, Post Falls and the smaller towns in between, with Sandpoint and the Silver Valley on request. See our full service area list.
